中兴2826开局

walkone

set vlan 10 enable
set vlan 10 add port 1
set port 1 pvid 10   
config router
set ipport 1 ipaddress 10.10.10.1/24
set ipport 1 vlan 10
set ipport 1 enable
exit
config tffs
remove kernel.z
tftp 10.10.10.100 download kernel.z
重启
login：admin
Password：zhongxing
zte>enable
Password:zte
zte(cfg)#
zte(cfg)#config tffs
zte(cfg)#remove running.cfg (清除原来配置)
zte(cfg)#exit
zte(cfg)#reboot
设置用户名
creat user 2826user
设置密码
loginpass 2826guest
zte(cfg)#
term moni off
set vlan 1 del port 1-25
set vlan 1 del trunk 1-8
set port 25 auto dis
set port 25 duplex full
set vlan 256 add port 1 untag
set vlan 257 add port 2 untag
set vlan 258 add port 3 untag
set vlan 259 add port 4 untag
set vlan 260 add port 5 untag
set vlan 261 add port 6 untag
set vlan 262 add port 7 untag
set vlan 263 add port 8 untag
set vlan 264 add port 9 untag
set vlan 265 add port 10 untag
set vlan 266 add port 11 untag
set vlan 267 add port 12 untag
set vlan 268 add port 13 untag
set vlan 269 add port 14 untag
set vlan 270 add port 15 untag
set vlan 271 add port 16 untag
set vlan 272 add port 17 untag
set vlan 273 add port 18 untag
set vlan 274 add port 19 untag
set vlan 275 add port 20 untag
set vlan 276 add port 21 untag
set vlan 277 add port 22 untag
set vlan 278 add port 23 untag
set vlan 279 add port 24 untag
set port 1 pvid 256
set port 2 pvid 257
set port 3 pvid 258
set port 4 pvid 259
set port 5 pvid 260
set port 6 pvid 261
set port 7 pvid 262
set port 8 pvid 263
set port 9 pvid 264
set port 10 pvid 265
set port 11 pvid 266
set port 12 pvid 267
set port 13 pvid 268
set port 14 pvid 269
set port 15 pvid 270
set port 16 pvid 271
set port 17 pvid 272
set port 18 pvid 273
set port 19 pvid 274
set port 20 pvid 275
set port 21 pvid 276
set port 22 pvid 277
set port 23 pvid 278
set port 24 pvid 279
set vlan 199,256-279 add port 25 tag
set vlan 199,256-279 enable   
  
config router     
set ipport 24 ipaddress 125.45.62.70 255.255.255.0
set ipport 24 vlan 199
set ipport 24 enable   
iproute 0.0.0.0 0.0.0.0 125.45.62.254   
exit      
查看路由设置内容
show iproute
    Type   IpAddress       Mask            Gateway         Metric IPport
    ------ --------------- --------------- --------------- ------ ------
    direct 10.40.64.0      255.255.252.0   10.40.67.248    0      0
    static 0.0.0.0         0.0.0.0         10.40.67.254    1      0
    Total: 2


关闭端口
set ipport 0 disable
删除端口设置
clear ipport 0 ipport 0 ipaddress 10.40.67.248/23
删除路由
clear iproute 0.0.0.0/0 10.40.67.254
删除vlan
clear ipport 0 vlan 1
保存设置
saveconfig

                     /////////////////////  查看交换机连接状态  ////////////////////////
show arp ipport 0
ARP table usage: used = 2, free = 1022, waiting send packet = 0
IPport Time(min) IpAddress       MacAddress        Vlan Type
  ------ --------- --------------- ----------------- ---- -------
  0      2         10.40.53.97     00.11.d8.7a.d7.d7 1    dynamic
  0      0         10.40.53.251     1    dynamic


                ///////////////////// 在2826E上通过IP地址查端口的方法 /////////////////////
zte(cfg)#ping 10.40.53.97
  Reply from 10.40.53.97 : bytes=28 time<1ms TTL=128
  Reply from 10.40.53.97 : bytes=28 time<1ms TTL=128
  Reply from 10.40.53.97 : bytes=28 time<1ms TTL=128
  Reply from 10.40.53.97 : bytes=28 time<1ms TTL=128
  Reply from 10.40.53.97 : bytes=28 time<1ms TTL=128
zte(cfg)#show arp
  ARP table usage: used = 2, free = 1022, waiting send packet = 0
  IPport Time(min) IpAddress       MacAddress        Vlan Type
  ------ --------- --------------- ----------------- ---- -------
  0      0         10.40.53.97     00.11.d8.7a.d7.d7 1    dynamic
  0      0         10.40.53.249    00.11.5b.82.14.ae 1    dynamic

               /////////////////////  查看此mac所在交换机的端口位置 /////////////////////
zte(cfg)#show fdb mac 00.11.d8.7a.d7.d7
  MacAddress        Fid  PortId Type
  ----------------- ---- ------ -------
  00.11.d8.7a.d7.d7 1    22     dynamic
  Total: 1

   
save   
reboot   
y   
(cfg)#config snmp
(cfg-snmp)# create community zte2826s public
(cfg-snmp)# create view zteview
(cfg-snmp)# set community zte2826s view zteview
(cfg-snmp)# set host 61.163.206.210 trap v1 zte2826s
(cfg-snmp)# set host 61.163.204.26 trap v1 zte2826s
(cfg)# set syslog add server 1 ipaddress 61.163.204.14 name local2