C114门户论坛百科APPEN| 举报 切换到宽版

亚星游戏官网

 找回密码
 注册

只需一步,快速开始

短信验证,便捷登录

搜索
查看: 5179|回复: 5

[FTTx/PON] 贝尔7360 OLT上行口起不来 [复制链接]

军衔等级:

亚星游戏官网-yaxin222  新兵

注册:2015-1-18
发表于 2016-1-11 17:00:19 |显示全部楼层
leg:isadmin># configure port nt-a:xfp:1 no shutdown
leg:isadmin># configure port nt-a:xfp:1 ethernet no autonegotiate
leg:isadmin># configure port nt-a:xfp:1 ethernet speed 1000      
leg:isadmin># show port nt-a:xfp:1 detail

===============================================================================
Ethernet Interface
===============================================================================
Description        : SFP Plus Port
Interface          : nt-a:xfp:1                 Oper Speed       : 0 mbps
Link-level         : Ethernet                   Config Speed     : 1 Gbps
Admin State        : up                         Oper Duplex      : full
Oper State         : down                       Config Duplex    : N/A
Physical Link      : No                         MTU              : 2048
IfIndex            : 35848192                   Hold time up     : 0 seconds
Last State Change  : 01/01/1970 00:13:33        Hold time down   : 0 seconds
Last Cleared Time  : N/A                        

Configured Mode    : access                     Encap Type       : 802.1q
Dot1Q Ethertype    : 0x8100                     
Auto-negotiate     : false                      MDI/MDX          : unknown
use-vlan-dot1q-ety*: No                        
Egress Rate        : Default                    
Egress Burst       : Default                    

Configured Address : 18:4a:6f:56:d8:20
Hardware Address   : 18:4a:6f:56:d8:20
Cfg Alarm          :
Alarm Status       :
Category           : regular                    
LoopbackMode       : none                       LoopbackVlan     : 0
Remark             : disbled                    
State Change Count : 0                          

===============================================================================
Traffic Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Octets                                                 0                      0
Packets                                                0                      0
Errors                                                 0                      0

===============================================================================
Ethernet Statistics
===============================================================================

Broadcast Pckts  :                   0  Drop Events      :                   0
Multicast Pckts  :                   0  CRC/Align Errors :                   0
Undersize Pckts  :                   0  Fragments        :                   0
Oversize Pckts   :                   0  Jabbers          :                   0
Collisions       :                   0

Octets                         :                   0
Packets                        :                   0
Packets of 64 Octets           :                   0
Packets of 65 to 127 Octets    :                   0
Packets of 128 to 255 Octets   :                   0
Packets of 256 to 511 Octets   :                   0
Packets of 512 to 1023 Octets  :                   0
Packets of 1024 to 1518 Octets :                   0
Packets of 1519 or more Octets :                   0
===============================================================================
* indicates that the corresponding row element may have been truncated.

===============================================================================
Port Statistics
===============================================================================
                                                   Input                 Output
-------------------------------------------------------------------------------
Unicast Packets                                        0                      0
Multicast Packets                                      0                      0
Broadcast Packets                                      0                      0
Discards                                               0                      0
Unknown Proto Discards                                 0                       
===============================================================================
leg:isadmin># show equipment diagnostics sfp nt-a:xfp:1 detail
================================================================================
sfp table (detailed)
================================================================================

--------------------------------------------------------------------------------
sfp
--------------------------------------------------------------------------------
              position : nt-a:xfp:1                                            
     diag-avail-status : no-error                                             
                   los : no-los                       tx-fault : no-tx-fault   
              tx-power : "No Power"                                            
              rx-power : "-8.90 dBm"                                          
       tx-bias-current : "0.00 mA"                                             
        supply-voltage : "3.32 VDC"                                            
           temperature : "34.53 degrees Celsius"                              
       temperature-tca : normal-value                                          
           voltage-tca : normal-value                                          
      bias-current-tca : normal-value                                          
          tx-power-tca : low-alarm-th                                          
          rx-power-tca : normal-value                                          
       rssi-profile-id : 65535                      rssi-state : disable        
================================================================================
模块没问题,提示无输出功率,接收能看到,模块换到其他设备上马上就亮,不是自协商的问题

举报本楼

本帖有 5 个回帖,您需要登录后才能浏览 登录 | 注册
您需要登录后才可以回帖 登录 | 注册 |

手机版|C114 ( 沪ICP备12002291号-1 )|联系大家 |网站地图  

GMT+8, 2024-9-21 22:53 , Processed in 0.427593 second(s), 17 queries , Gzip On.

Copyright © 1999-2023 C114 All Rights Reserved

Discuz Licensed

回顶部
XML 地图 | Sitemap 地图